NordVPN
Every wireless access point comes with a name or more specifically known as SSID. No doubt, you have noticed them before joining any wireless network. Additionally, you might have set or are about to put an SSID up for your home network.
So, what SSID names should look like?
If you are thinking the same and can’t decide on a suitable one, this guide is for you. We have arranged SSID names best practices, so that you can easily stick to a proper one. Get home-friendly SSID deciding rules and more in the upcoming sections.
General Rules to Create SSID Names for Your Home Networks
SSID represents Service Set Identifier. By now, you have understood that it’s the recognisable name of any wireles network. Without identifying them, it’s not possible to join the right network or enter the corresponding password, that’s why SSID names are important for internet users.
Before you set your wireless network’s name after your or any other’s name, you should be a little careful about it. Any intruder can sneak into your devices if your home network clearly pronounces your name and there’s no solid protection against it.
What should be SSID names for homes? Well, you should keep the following matters in your mind before you construct an SSID for your home network. You can make it look funny and give your neighbours a good laugh just by following the rules below:
Prerequisites for SSID Names
Remember that the SSID name is case-sensitive in nature. So you need to enter it the exactly way you have set it. In addition to this, you can’t stretch an SSID name as far as you want. SSID names are allowed to be at most 32 characters long.
So you have to discard longer names. Well, this counts characters, spaces, numerics, and special characters.
Keep the SSID Identifiable
Most users take this matter lightly and they end up keeping their networking device names as SSID names. Thus, it can create great confusion especially if it’s an apartment building where you reside. You will encounter difficulties with recognising your own home network if you don’t change the factory-default SSID of the router or modem.
So you should create practical SSID names for Wi-Fi and it doesn’t have to be completely unique. Additionally, you should avoid SSIDs that appear the same. So you can take a look at available networks around you if possible before you decide on the final name.
Customise a Dedicated Guest Network
Are you eager to keep your network separate from the guest network and usage? It’s better to keep them separate for your security issues. Set up a guest network with a unique and different guest network SSID than the one you use.
Configure a guest network and name it separately from the main home network. You can create numerous categories according to the types of users. This will keep the traffic and interference away from each other.
Name Your Network As Per Band Channels
Most routers now offer dual-band channels for optimised use. If your router behaves similarly then you can name your networks differently. For example, you can add the 2.4GHz phrase to the band that uses the 2.4GHz frequency band.
On the other hand, you can include the 5GHz phrase in the SSID of the 5GHz bandwidth from your access point. However, you are allowed to put up a single name for both channels. They can only differ at the band specification in their SSID names. This will help you while switching from one band to another and you won’t be confused over them.
Otherwise, you can name these bands separately. Make sure that you remember them and they shouldn’t frustrate you in your hour of need.
Keep the SSID Visible
As you already know, SSID names can tell a lot about you if you don’t plan a name wisely. To avoid such tantrums away, people tend to hide their SSID names. However, this is not mandatory and even it can create a nuisance when you want to pair a new device.
This happens because the networking device stops broadcasting its name once you hide its SSID. additionally, overall Wi-Fi performance can be impacted negatively just because of its hidden SSID.
On top of that, hiding SSIDs are not very useful. Intruders can still utilise a Wi-Fi network even if stays hidden. That’s why we recommend setting up an SSID with a unique approach and keeping it visible. However, always keep your network WPA2 or higher standard protected.
Handle Tricky SSIDs of Wi-Fi Repeaters
If your home is big enough and you deploy mesh network technology or repeaters then it applies to you. Users in the house need to deal with numerous networks under the same roof. That’s why you need to pay special attention to SSID names for these repeaters.
A single name with the slightest changes in them for every repeater might confuse you. On the other hand, your mobile device might connect to a usual network even though there’s a full-coverage network available. And, the former network might be weak but you can’t tell the difference due to the SSID.
So it’s better to name every repeater with different SSIDs. We know that the process can be troublesome but it will still benefit you to utilise the best coverage network at any given moment or place.
Things to Avoid for SSID Names Home
There are particular SSID names to avoid for any home network. Otherwise, they can provoke a data breach beyond your control. Here are our observations that you should follow while crafting a home network SSID:
- Never add personal information like user’s name, date of birth, address, etc in the SSID
- Don’t include the router’s password or its partial portions in the SSID
- Avoid the manufacturer’s name from the default name of the router SSID; or else, this might make the job easy for hackers
- Don’t make SSIDs too complicated
Hence, the main propaganda is to keep your home SSID names simple yet quirky. They strictly should not bear any personal data.
What are Some Out-of-the-Box SSID Names that You can Use?
In case you face issues with an interesting and unique SSID for your home network then you can use the following ones. These SSID names for homes are trending so you can give them a shot:
- Benjamin FrankLAN
- Loading…
- Not Available
- Access Denied
- Move On
- VirusInstaller
- This LAN is My LAN
- 404 WiFi Unavailable
- Connected, Secured
- Abraham Linksys
- Obi-WAN Kenobi
How to Change SSID Names?
If you have made up your mind about renaming SSIDs then you can go through the rules and suggestions stated above. You can change SSID names from the specific router’s admin control panel. Simply, log into your router’s web-based or app-based admin panel and navigate to the section where you can change the SSID. make sure that you know the IP address of your router to access its control or admin panel.
