The Roku TV may display a black screen due to many reasons. A faulty screen is one of the prime causes of this issue. Thus, replacing the Smart TV’s screen can help you to overcome this screen glitch. However, you must check whether the cables are connected properly before installing a new screen.
Disconnect and reconnect the Roku TV cables and check if that solves the problem. Besides, you must try to change the TV’s “Input/Source” to fix the error. Press the Smart TV’s “Reset” button, and then try to restart the device. If the Roku TV issue persists, consider replacing the existing screen.
Fixing a damaged Roku TV screen is pretty simple. Moreover, you can install the new TV screen within minutes if you have the right tools.
However, you must always take protective measures before replacing the TV screen. Don’t use any liquids or chemical products, leading to screen damage.
Requirements for Replacing the Broken or Faulty Roku TV Screen
It is important to know about the tools that are required to replace the Roku TV screen. Otherwise, it might take ample time to install the new screen. Users must assemble a mini flathead screwdriver and a thin clear tape.
You will need a newspaper or other protective lining to place the screen. Do you have a thin metal sheet? If not, then consider buying this material for a hassle-free screen replacement.
Besides, you must check the Roku TV model before buying the screen. Otherwise, you might experience complicated screen issues after the installation.
Easy Steps to Fix a Broken/Damaged Roku TV Screen
You need to have adequate technical skills to replace a broken Roku TV screen. Otherwise, you might damage the internal units while installing the new display.
However, if you have technical knowledge, follow these steps to install a new Roku TV screen:
Remove the TV Frame
You must first open the TV and remove the frame to replace the cracked screen with a new one. Take a mini flathead screwdriver to unmount all the screws around the Roku TV frame.
There is one screw in each corner of the frame. Thus, remove all of them and gently remove the frame from the TV set.
Hold down the Roku TV frame’s opposite corners and pull it away from the set. However, don’t pull out the television towards you, causing damage to the hinges.
Remove the Roku TV’s Internal Units
Open each side of the TV from its respective corners using a flat-headed screwdriver. Then, push both sides of the TV slightly downwards until you hear a clicking sound.
This sound indicates that the Roku TV’s case has been released. Place the TV case on a flat surface and check if all the screws are unmounted.
Did you find any screws on the TV set’s internal braces? Remove them using the mini flathead screwdriver.
However, you should never exert excess pressure while unmounting the internal screws. It may damage the Smart TV’s internal units and increase the repair expenses.
Opt for Removing the Damaged Screen
Remove the cracked/damaged Roku TV screen after unmounting all the internal screws. Press the Smart TV’s opposite corners gently until the screen pops out from its place.
You must wear protective gloves while removing the broken Roku TV screen. Otherwise, it might cause safety issues in this TV screen repair project.
Install the New Roku TV Screen
You must first check whether the new screen fits inside the Roku TV set. If yes, slide it into the place where the old screen was installed. Additionally, the users must ensure to align all the connecting edges correctly.
Are you finding it difficult to place the new Roku TV screen? Place the TV set near the LED screen. Push the screen towards the Roku TV set.
After that, ensure the antenna wires pass through the motherboard. Consider mounting the new TV screen’s screws at each corner of the frame using the screwdriver.
Ensure all the TV units are Connected
Is the Roku Tv not working even after replacing the broken screen? Then, you might have to repeat the above-mentioned screen installation steps. Ensure you have mounted all the screws properly.
Sometimes, loose wire connections can generate power issues. Thus, disconnect and reconnect the necessary wires inside the TV set and check if that works.
A misaligned screen can prevent you from turning on the TV. Thus, you must check whether the TV screen is installed correctly.
If yes, the problem lies in the Roku TV’s internal parts. Replace the existing internal units with new ones and watch your favourite movies on the TV without glitches.
Precautions to Take while Installing the new Roku TV Screen
Unplug all the Roku TV cables and wires before replacing the existing screen with a new one. Do not force any tools or units to fit if they seem incompatible with the device. To avoid further issues, you must check whether all the screws are mounted tightly.
There should not be any exposed wires or cables after installing the screen. Otherwise, it might cause safety hazards while using the Roku TV. Moreover, you must check whether more than one screw is holding a cable in place.
Unmounting the wrong screws could cause severe damage to the Roku TV. Thus, contact an expert if you are unaware of the screws that need to be unmounted. It will save costly TV repair expenses and help you to avoid further damage.
How to Overcome the Unwanted Roku TV Screen Issues?
Roku users can avoid screen issues by changing the TV resolution. The Smart Tv might display a black screen for setting an incorrect screen resolution.
Thus, access the Roku TV settings, and go to “Video Settings”. Select “Resolution” and choose “High (1080p) using the remote’s “Up” and “Down” keys.
Additionally, you must check for defects in the TV cables before connecting them. Replace the TV cables if you find any wear and tear. Besides, users must keep the Roku TV updated to avoid screen glitches.
Access the Smart TV settings and choose “System Update”. The Roku device will install the latest software in the device within minutes.
An unwanted power surge can cause screen issues in the Roku TV. However, you can prevent that by using a surge protector.
It will provide an additional layer of protection against power surges. Thus, get the right surge protector for the Roku TV model and protect the device from further damage.
Is the Roku TV not working after Replacing the Screen? Here’s How to Fix it
Users must ensure to set the correct TV input if they can’t access the Roku interface. Additionally, you must check whether the video cable is plugged in securely. Turn off the Roku TV and unplug all the cables after 2-3 minutes.
Reconnect the HDMI, power and USB cable to the correct TV port after 10 seconds. Set up the TV by following the on-screen instructions that display on the home screen.
Access any TV channel and check if you stream any content. If the screen issue persists, consider resetting the Roku TV.
